Don’t
let static……
Dissipate your profits ™ Polyonics
1 mil ESD labels:
Virtually eliminate ESD buildup…..
Offer ease of use….
and lower cost and weight
Polyonics’ new ESD label made of 1 mil white polyimide label
material, XF-781, are designed to meet the extreme challenges of
printed circuit board manufacturing, and provides:
Cost
Savings: The thinner construction of our 1-mil polyimide
label material allows you to keep the high performance properties
of Polyonics’ traditional materials, while reducing your label
cost.
Greater
Operational Ease of Use: The lower profile of these new
polyimide label materials allows for easier use in processes which
demand thin materials, such as solder paste screen printing. The
lower profile also makes it easier for uniform stacking and loading
of boards.
Weight
Reduction: Lighter 1 mil labels are ideal for small electronics
applications in which reducing overall product weight is critical.
To
receive a free sample of Polyonics’ new ESD XF-781 click on
Polyimide Labels ESD
Labels.
Thermal
Transfer Printers: XF-781 can be used with most industrial
thermal transfer printers, such as Zebra, Intermec, Sato, Printronix,
NEC, Datamax, and Brady label printers , for harsh environment bar
code label printing with a wide variety of thermal transfer ribbons.
Ribbon:
Ricoh B110CR, C, Armor AXR 7+, AXR8, Sony 4070, JPP1, Union Chemicar US300
|
Static
Dissipative Labels...
The
Benefits
Electrostatic
discharge (ESD) can seriously damage almost any electronic component
or device. They can often go undetected until the product reaches
the field.
Polyimide
labels used as circuit board bar code labels are one of the many
potential sources of ESD damage. Static charges in excess of 5000
volts can be generated when a label is removed from its release
liner even in an otherwise ESD-safe environment. Typical pressure
sensitive labels act as insulators, and may retain this static charge
for a long period of time.
Polyonics’
unique TRIBOGARD® technology adapts the resistivity
of the label to the extent that any charge generated, no matter
how small, dissipates quickly within a few milliseconds. The greatly
reduced amount of static charge generated when these labels are
removed from their release liners (<
25 volts/sq in) makes them safe enough so they won’t
damage static sensitive components.
You
can find more information at TRIBOGARD
ESD Kapton and Polyimide Labels.
Polyonics,
Inc., does not sell or endorse ribbons from specific ribbon companies.
Our recommendations are based solely on Polyonics’ testing
methods and procedures and are subject to revision without further
notice.
For more information regarding ribbons and label materials click
on Thermal Transfer
Printable Polyimide Labels
|
