Don’t let static……
Dissipate your profits ™
Polyonics 2 mil polyimide ESD labels:
Virtually eliminate ESD buildup…..
Offer high temperature resistance….
and Auto Apply
Polyonics’ new ESD polyimide label made of 2 mil
white polyimide label material, Xf-782, is designed to meet the
extreme challenges of printed circuit board manufacturing, and provides:
Minimize
ESD problems: XF- 782 polyimide label material is designed to minimize
ESD buildup when the label is peeled from the liner. Typical ESD
values are < 25 volts /sq in., although many times the voltage
is not measureable.
High
temperature resistance: The 2 mil polyimide label resists
the high temperatures of PCB manufacturing, including direct contact
with wave solder processes.
Auto
Apply: 2 mil polyimide labels are stiff enough for automatic
application by print and apply equipment. 1 mil polyimide labels,
while less expensive, cannot be automatically applied.
To
receive a free sample of Polyonics’ new ESD polyimide label
materials see ESD
Polyimide Label Samples
To
learn more about ESD safe labels see TRIBOGARD
Kapton Labels and ESD Labels.
Thermal
Transfer Printers: Our polyimide label materials can be
used with most industrial thermal transfer printers, such as Zebra,
Intermec, Sato, Printronix, NEC, Datamax, and Brady label , for
harsh environment bar code label printing with a wide variety of
thermal transfer ribbons.
Ribbon:
XF-782- Armor AXR7+,AXR8, Ricoh B110CR, C, Sony 4070, JPP1, DNP R510 & Union Chemicar US300
|
Static
Dissipative Labels...
The
Benefits
Electrostatic
discharge (ESD) can seriously damage almost any electronic component
or device. The damage may occur at the factory and can often go
undetected until the product reaches the field.
Polyimide
labels used for circuit board labels are one of the many potential
sources of ESD damage. Static charges in excess of 5000 volts can
be generated when a polyimide label is removed from its release
liner even in an otherwise ESD-safe environment, with operators
gowned and wearing proper static control wrist and shoe straps.
Typical pressure sensitive polyimide labels act as insulators, and
may retain this static charge for a long period of time.
Polyonics’
unique TRIBOGARD®
technology is designed to dissipate the static charge as quickly
as possible. We adapted the resistivity of the polyimide label to
the extent that any charge generated, no matter how small, dissipates
quickly within a few milliseconds. The greatly reduced amount of
static charge generated when these polyimide labels are removed
from their release liners (< 25
volts/sq in) makes them safe enough so they won’t
damage static sensitive components.
Polyonics,
Inc., does not sell or endorse ribbons from specific ribbon companies.
Our recommendations are based solely on Polyonics’ testing
methods and procedures and are subject to revision without further
notice.For more information on ribbons, Thermal
Transfer Ribbons for Polyimide ESD Labels
|
