Listed
below are the Polyonics Polyimide and Kapton label materials which
have been evaluated with Dynic ribbons in Polyonics' testing laboratory.*
Each
of the Polyonics Polyimide Label Material data sheets may be accessed
by clicking on the Polyonics product number in the table. Click on
the 
for direct access to Polyonics' UL file data.
For
contact infornation, click on logo-> 
Dynic
Dynic USA Corporation,
4750 NE Dawson Creek Drive, Hillsboro, OR 97124 (800)-326-1249
EU: Dynic(UK) Ltd, Units
40-42, Portmanmoor Rd., Industrial Estate, Eastmoors, Cardiff CF2 2HB,
UK
Tel +44 (01222) 483 973
| |
Dynic |
Polyonics |
|
|
|
|
| L3 |
HL-30 |
Product |
Thickness |
Color |
Finish |
Other |
| |
|
XF 541 |
2
mil (50µ) |
Tan |
Matte |
Ink
jet, laser, Dot matrix |
| |
|
|
|
|
|
|
| |
|
XF 550 |
2
mil (50µ) |
White |
Gloss |
|
| |
|
|
|
|
|
|
| |
|
XF 552 |
2
mil (50µ) |
YelOrng |
Gloss |
Lead
free applications  |
| |
|
|
|
|
|
|
| |
|
XF 555 |
2
mil (50µ) |
White |
SemiGloss |
|
| |
|
|
|
|
|
|
| |
|
XF 557 |
2
mil (50µ) |
White |
SemiGloss |
|
| |
|
|
|
|
|
|
| |
|
XF 557/1 |
1
mil (50µ) |
White |
SemiGloss |
|
| |
|
|
|
|
|
|
| |
|
XF 562 |
2
mil (50µ) |
White |
SemiGloss |
Estat
polyimide |
| |
|
|
|
|
|
|
| |
|
XF 565 |
2
mil (50µ) |
White |
Matte |
Ink
jet, laser, Dot matrix |
Note:
The above ratings are based on Polyonics Laboratory tests using a Zebra90xi
thermal transfer printer. Polyonics,
Inc., does not sell or endorse ribbons from specific ribbon companies.
Our recommendations are based solely on Polyonics testing methods and
procedures and are subject to revision without further notice.
Please
call us today for specific ribbon label combinations to match your specific
requirements. You can email Polyimide
Label and Ribbon Matching.
For other
manufacturers of Thermal Transfer Ribbons,
visit
Thermal Ribbon Manufacturers Directory,or
go directly to their websites at Links
to Thermal Transfer Ribbon Manufacturers.
*A particular
ribbon's exclusion from the list is indicative that a particular ribbon
did not pass the criteria established by Polyonics, and in no way implies
the suitability of that particular ribbon for its commercial use. The
results only reflect data observed from testing in Polyonics laboratories.
Actual results in the field may differ, and users are urged to thoroughly
test the ribbon and polyimide label material chosen before it is used
in production.
Untitled Document
WARRANTY
Polyonics products are sold with the understanding
that the buyers will test them in actual use and determine for themselves
their adaptability to their intended uses. Polyonics warrants to the
buyers that its products are free from defects in material and workmanship,
but limits its obligation under this warranty to replacement of the
product shown to Polyonics' satisfaction to have been defective at the
time Polyonics sold it. This warranty does not extend to any persons
obtaining the product from the buyers. This warranty is in lieu of any
other warranty, express or implied, including, but not limited to, any
implied warranty of merchantability or fitness for a particular purpose,
and of any other obligations or liability on Polyonics' part. Under
no circumstances will Polyonics be liable for any loss, damage, expense,
or consequential damages of any kind arising in connection with the
use, or inability to use, Polyonics' products.
|
