Tribogard® labels are static dissipative, and withstand manufacturing
temperatures up to 400ºF (204ºC), without losing any of
their dissipative properties. Labels printed with the appropriate
thermal transfer ribbon withstand a wide range of harsh chemicals
and solvents used in the PCB manufacturing process. For more information
on ribbon/label material compatibilities, see Thermal
Transfer Printable Polyimide and Polyester ESD Labels.
The
surface resistivity is >106 ohms. Static discharge is less than
100 volts/sq in, when the label peeled from the liner.
| Product |
Type |
Thickness |
Color |
Finish |
| XF
446 |
Polyester |
2
mil |
White |
Matte |
| |
|
Dai
Nippon R510, Sony 4070, iimak Sp-330, JPP1 |
| XF
561 |
Polyimide |
1
mil |
White |
Matte |
| |
Or
Kapton |
Dai
Nippon R510, Dynic HL 30, Jpp1, Sony 4070, Armor 600, 7+, Union
Chemicar UH 100, UH 150, UN 230, UN 500, US 300 |
| XF
562 |
Polyimide |
2
mil |
White |
Matte |
| |
Or
Kapton |
Dai
Nippon R510, Dynic HL 30, Sony 470, Armor 600, 7+, JPP 1, Union
Chemicar UH 100, UH 150, UN 230, UN 500, US 300 |
Polyonics,
Inc., does not sell or endorse ribbons from specific ribbon companies.
Our recommendations are based solely on Polyonics testing methods
and procedures and are subject to revision without further notice.
XF
561 and 562 are ESD polyimide label materials.
Although polyimide label (or kapton label) products can thermally
and physically withstand temperatures up to 1,000ºF (528ºC),
the esd properties of the polyimide label are affected under these
conditions. Polyonics offers an extensive product line of polyimide
label materials, if ESD label stock is not required.For more information,
see Polyimide and Kapton
Labels
For
additional literature or FREE SAMPLES of any POLYONICS
product, please Polyimide
Label Samples, Literature, and Other requests.
Test
data and test results contained in this document are for general
information only and shall not be relied upon by Polyonics customers
for designs and specifications, or be relied on as meeting specified
performance criteria. All values shown are averages and should not
be used for specification Purposes. Customers desiring to develop
specifications or performance criteria for specific product applications
should contact Polyonics for further information.
WARRANTY
Polyonics products are sold with the understanding that the buyers
will test them in actual use and determine for themselves their
adaptability to their intended uses. Polyonics warrants to the buyers
that its products are free from defects in material and workmanship,
but limits its obligation under this warranty to replacement of
the product shown to Polyonics' satisfaction to have been defective
at the time Polyonics sold it. This warranty does not extend to
any persons obtaining the product from the buyers. This warranty
is in lieu of any other warranty, express or implied, including,
but not limited to, any implied warranty of merchantability or fitness
for a particular purpose, and of any other obligations or liability
on Polyonics' part. Under no circumstances will Polyonics be liable
for any loss, damage, expense, or consequential damages of any kind
arising in connection with the use, or inability to use, Polyonics'
products.
|
