|
POLYONICS' PSM Matches Price and Performance to Customers' Requirements
If you sell features not needed by the customer, you allow competition to sell value....i.e. you've oversold the customer. POLYONICS THERMOGARD™ High Performance Label Materials provide a continuum of benefits which translate directly into matched cost/benefit values.
THERMOGARD™ PRICE/PERFORMANCE PRODUCTS
MAJOR PERFORMANCE CRITERIA
Temperature Resistance: (400°F-1,000°F)
Film base
Label thickness (1 mil, 2 mil)
Film type
Adhesive parameters |
OPTIONS:
Adhesives:
|
Permanent, Removable (No residue)
Acrylic,Silicone
Thickness to your specification
|
Colors:
|
White or amber as standard; color matching also available.
Gloss or matte surface |
Liner:
|
55# Glassine, 50# SCK paper
1.5, mil PET for cleanroom applications
Silicone free release liners |
EXAMPLES of THERMOGARD™ PRODUCT FAMILY
CALL FOR A COMPLETE PRODUCT CATALOG 1-(888)-POLYONX.
XF-446
|
POLYESTER
|
2
|
1
|
Up to 400°F
|
White, semigloss;
not for automatic
print/apply |
XF-540
|
POLYMERIC
|
2
|
2
|
Up to 450°F
|
White, semi gloss
|
XF-541
|
POLYIMIDE
|
2
|
2
|
Up to 1,000°F
|
L. yellow, matte
|
XF-552
|
POLYIMIDE
|
2
|
2
|
Up to 1,000°F
|
Yellow, gloss
|
XF-557
|
POLYIMIDE
|
2
|
2
|
Up to 1,000°F
|
White, semi gloss
|
XF-582
|
POLYIMIDE
|
2
|
2
|
Up to 1,000°F
|
White, semi gloss
Lead free applications |
XF-558
|
Modified
POLYIMIDE
|
2
|
2
|
Up to 600°F
|
Economical substitute for polyimides for SMT
applications. Possible
for direct solder contact,
but test thoroughly. |
** NOTE: Effective Service Temperatures depend not only on the temperature, the length of time that the label is exposed to that temperature, and the mass of the material the label is adhered to. Various substrates conduct heat differently. Our materials perform differently on epoxy board versus stainless steel panels. For example, XF-557 can withstand temperatures up to 1,000°F for a few seconds. It performs well at temperatures greater than 700°F for a few minutes, and above 500°F for hours. Similarly, the other THERMOGARD™ products exhibit their own time/temperature Effective Service characteristics. Test each material thoroughly for individual process times and temperatures.
Each POLYONICS® product is tested rigorously with up to ten different ink ribbons, each on one of several printers. These labels are then subjected to a variety of chemicals, cleaners, fluxes, and solvents, under several different process environments. Over 3500 individual tests have been performed on our THERMOGARD™ product line.
WARRANTY
POLYONICS’ products are sold with the understanding that the buyer will test them in actual use and determine for themselves their adaptability to their intended uses. POLYONICS warrants to the buyer that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to POLYONICS’ satisfaction to have been defective, provided that the Buyer has complied with the handling, storage and shelf life requirements as specified by Polyonics in applicable materials specifications.
The above warranties extend solely to Buyer and all warranty claims must b e made by the Buyer. Rewqork or replacement shall neither extend nor decrease the original warranty period. The term of all warranty periods shall not exceed thirty (30) days from the deate of the original shipment.
THE ABOVE WARRANTIES ARE EXCLUSIVE OF AND IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED STATUUORY OF OTHERWISE. NO IMPLIED STATUTORY WARRANTLY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. POLYONICS SHALL NOT BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL, ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, OR FROM DELAY IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE WARRANTY. |
